You should be familiar with FN TYPE AIR COOLED CONDENSER! FN TYPE AIR COOLED CONDENSER is a heat exchanger that uses air to cool thermal fluids. The hot fluid in the tube exchanges heat with the air outside the tube through the tube wall and fins, and the air used is usually supplied by a fan.
FN TYPE AIR COOLED CONDENSER can be used for cooling or condensation, and is widely used in: oil refining, condensation of petrochemical tower top vapor; cooling of reflux oil and tower bottom oil; cooling of various reaction products; cooling of circulating gas and power plant turbine exhaust. condensation of gas. The working pressure can reach 69 MPa. However, the power consumption, noise and floor space are large, and the cooling effect is greatly affected by climate change.
The function of the FN TYPE AIR COOLED CONDENSER is to send the heat (hot air) generated by the motor loss to the cooler, and the hot air is cooled by the cooler. The inside of the FN TYPE AIR COOLED CONDENSER is arranged with aluminum seamless tubes, and the inside of the tube passes through the external fan. Air cooling is carried out, and the cooled air is sent into the motor through the inner fan, so that the hot and cold air is circulated. The high-quality air cooler is mainly composed of three parts: tube bundle, fan and frame. Tube bundles include heat transfer tubes, tube boxes, side beams and beams, etc. It has the following advantages: one is to use the air temperature rise for cooling to save water resources; the other is that the air can be obtained at will, and the location selection is not restricted; the third is that the air is less corrosive and the equipment has a long service life. Fourth, the use of air coolers can save a lot of industrial water, reduce environmental pollution, and reduce infrastructure costs. Especially in water-deficient areas, replacing water-cooling with air-cooling can alleviate the contradiction of water shortage.