As we all know, TEM EVAPORATOR is an important part of the refrigeration system and plays a very important role in its operation. Therefore, in order to ensure the normal operation of the refrigeration system, the maintenance and maintenance of the tube-and-tube evaporator cannot be ignored.
1. During the maintenance of TEM EVAPORATOR, we need to carry out leak detection frequently. As you know, leaks are a common failure of many evaporators and must be taken care of throughout use. Regardless of the method used for leaks, we need to pay attention. It is best to have someone responsible for the leakage of the tube evaporator. Once this situation is found, it must be dealt with in time. If the relevant person can't solve it, it needs to be reported.
2. Whether the TEM EVAPORATOR is used frequently or occasionally, it is necessary to carefully check the frosting situation. If the frost layer is too thick, it needs to be defrosted in time. If the frosting is abnormal, it may be caused by a blockage somewhere, so you need to find out the reason first. In either case, it needs to be taken seriously.
3. If the TEM EVAPORATOR needs to be shut down for a long time, relevant personnel need to put the refrigerant into the liquid storage tank or condenser to keep the pressure of the evaporator at about 0.05mpa (gauge pressure). If it is placed in the evaporator of the salt pond, it needs to be rinsed with tap water first, and then the pond is filled with tap water.
To sum up, the relevant personnel of the TEM EVAPORATOR manufacturer must do the above points when maintaining the tube evaporator. No matter which point, it needs to be paid enough attention. Only in this way can its service life be extended to a certain extent.