Hello, welcome to www.tianyicool.cn!

language
中文
英文
TianyiCOOL
NEWS

How TEB EVAPORATOR works

TEB EVAPORATOR

TEB EVAPORATOR

TEB EVAPORATOR

TEB

TEB EVAPORATOR is made of two-layer metal plates by high-pressure gas expansion molding or mechanical pressure molding. It can also be made of aluminum alloy die-casting. This TEB EVAPORATOR is widely used in small refrigeration equipment such as refrigerators, merchandise display cabinets, and popsicle storage boxes.

TEB EVAPORATOR

The heat transfer coefficient of TEB EVAPORATOR in liquid is greater than that in gas, and the heat transfer coefficient in flow is greater than that in static state.

TEB EVAPORATOR is widely used because of its good heat transfer effect, compact structure, small footprint and convenient installation. The structure of TEB EVAPORATOR is the same as the horizontal shell and tube condenser. In order to control the proper flow rate, the coolant carrier enters from the lower part of the end cap and flows back and forth between the TEB EVAPORATOR and the end cap to form a multi-program flow. The refrigerant flows outside the tube, the throttled refrigerant liquid enters from the bottom or side of the evaporator, and the gas is discharged from the upper part.

The upper part of the TEB EVAPORATOR cylinder is usually equipped with several rows of cooling pipes or an air bag is welded to the shell to separate the liquid droplets before the gas leaves the TEB EVAPORATOR. Large-scale TEB EVAPORATOR generally makes a special separation equipment.

When working, TEB EVAPORATOR should keep a certain amount of liquid refrigerant in the shell, and the liquid level is controlled by the floating ball valve. The height of the hydrostatic pressure level should be approximately the diameter of the cylinder. Most of the cooling pipes are immersed in liquid, and the heat exchange is carried out in a liquid-liquid manner. Therefore, the heat transfer effect is better and the heat transfer coefficient is greater. But the liquid level should not be too high, otherwise the refrigerator will return liquid.

底部logo

Tel: 0086-532-88367570
Fax: 0086-532-88368610
E-mail:
info@tianyicool.cn   tianyicool@vip.163.com
Web: http://www.tianyicool.cn
Add: No.9 Guangzhou road, Pingdu city, Qingdao China.

 

Service support

 

 

Message Board

留言应用名称:
客户留言
描述:
验证码