MONOBLOCK UNIT is widely used in cold storage warehouses, but in the course of many years of use, the disadvantages of food drying, food discoloration, fan energy consumption and failure, and electric frost energy consumption have become increasingly prominent, making food operators and refrigeration project managers actively Find a solution to this problem.
The exhaust pipe evaporator of MONOBLOCK UNIT mainly includes steel pipes, copper pipes and aluminum pipes, and there are certain shortcomings due to material problems. When the bare pipe uses steel pipe and copper pipe, the heat transfer coefficient between the inside and outside of the pipe is greatly different, resulting in material waste. The cost of copper pipes is too high, the weight of the evaporator is too large, which increases the structural cost of the cold room, and many undesirable factors limit its development. The aluminum row of MONOBLOCK UNIT can not only solve the above problems, but also have more energy-saving and stable performance.
MONOBLOCK UNIT aluminum coil cold storage can use MONOBLOCK UNIT aluminum cold storage due to the customer's requirements for storing products, especially in the food industry, food humidity requirements, food drying, food discoloration and other special requirements, the aluminum cold storage can be stored for a long time, food The dry consumption is low. The aluminum row is hoisted on the top of the warehouse to form direct cooling and natural convection heat transfer, which at least reduces the dry consumption of cooling food. When the compressor is working, the dry food consumption increases, and the shutdown is alleviated. Due to the extremely fast cooling speed of the aluminum row, the working time of the compressor is shortened, the shutdown time is long, the food preservation effect is better, and the drain pipe is less frosted, so that the humidity of the warehouse is moderate and the temperature is stable. , constant temperature and humidity effect is good. Warehouse temperature fluctuations are small and investment costs are low.